Horiba Scientific DS-72G, Instruction Manual

Page: 78 / 106

58
6.4.1 Input Upper or Lower Limit Values
Upper limit value entry
Lower limit value entry
6.5 Electrode Model Setting
The electrode model setting in COND measurement applies for TDS measurement (refer
to "3.2.6 Electrode Model Setting" (P.45)).
1.
When selecting ON the Alarm, upper limit item,
the Upper limit value, tap
on the right of the
Upper limit value item.
2.
Enter an upper limit value on the numerical-key
screen.
To change the unit, tap on the unit change key
on the right of the numerical-key screen.
3.
Tap .
The setting applies.
To cancel the settings, tap
.
1.
When selecting ON the Alarm, lower limit item,
the Lower limit value, tap
on the right of the
Lower limit value item.
2.
Enter an upper limit value on the numerical-key
screen.
To change the unit, tap on the unit change key
on the right of the numerical-key screen.
3.
Tap .
The setting applies.
To cancel the settings, tap
.