Horiba Scientific DS-72G, Instruction Manual

Page: 25 / 106

5
1.1.8 Icons (Icon Bar)
The icons displayed on the bottom of the touch panel allow you to set up the instrument,
check calibration information, and print out and save data.
Icon Function
Menu
Used to perform measurement, display the Meter
SET screen, and switch to the inspection and
application modes.
Information
Used to check calibration information on the MEAS
or CAL screen, and application information on the
Meter SET screen.
User's guide
Used to check operation instructions and
information about measurement and maintenance.
Printer
Used to print out measurement or calibration
values or saved data when a printer is connected.
Save in USB Used to save measured data into a USB memory.
Save data
Used to save measurement values displayed on
the screen into the instrument.
Trash box
Used to delete calibration data or the data saved in
the instrument.
Operation
Used to start and stop the operations of
measurement and calibration, and to change to the
instantaneous value display.
The icon label depends on the corresponding
operation.