manualshive.com logo in svg

Horiba Scientific DS-72G, Instruction Manual

Share
Download
Horiba Scientific DS-72G Instruction Manual Download Page 42

 

22

2.7 Printer Setting

Printer Test

Auto Printout

Printout Layout

1.

Tap 

 on the right of the Printer item.

The printer setting screen is displayed. 
Tap 

 to return to the previous screen.

1.

Tap 

 on the right of the Printer test item.

The printing test is executed.
Printout contents

1.

Tap 

 on the right of the Auto printout item and 

select ON.

1.

Tap 

 on the right of the Printout Layout item.

The printing format screen is displayed.
Tap 

 to return to the previous screen.

The Printer item allows you to set printing 
contents, etc. effective only when a printer is 
connected with the instrument.

When a printer is connected with the instrument, 
this item allows you to perform a printer test.

When a printer is connected with the instrument, 
this item allows you to perform an automatic 
printer test after measurement or calibration 
completion.

This item allows you to change printing contents.

Summary of Contents for DS-72G











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands