S
YSTEM
P
ARAMETERIZATION AND
O
PERATION
6842 GPS Slim Line System - V09.01
35 / 98
hopf
Elektronik GmbH
Nottebohmstr. 41 • D-58511 Lüdenscheid • Tel.: +49 (0)2351 9386-86 • Fax: +49 (0)2351 9386-93 • Internet: http://www.hopf.com • E-Mail: [email protected]
4.1.2 SHOW Menu - Display of the System 6842 Base Settings
The
SHOW
function is called up to check the values entered or the values updated via the
GPS receiver. The values are only displayed here and cannot be changed.
After selecting the main menu by pressing
ENTER
the figure
2
is entered. The first
SHOW
selection frame appears.
The
SHOW
menu selection frames are output on the display. The menu is controlled as
follows:
•
The next selection frame is displayed by entering
ENTER
or
N
.
•
The corresponding display frame is called up by entering
Y
.
•
The display jumps to the next selection frame if
ENTER
or
N
are entered in the
display frame.
•
The
SHOW
menu can be exited at any time by pressing
BREAK
.
The individual functions of the System 6842 GPS are explained below.
4.1.2.1 Time Offset
The current time offset between the local time and UTC time can be viewed with this display
frame.
Selection frame:
S H O W D I F . - T I M E
Y / N _
After entering
Y
the following frame appears (example):
Display frame:
D I F - T I M E : + 0 1 : 0 0
Only
the set time offset to the local standard time (winter time) is always
displayed.
4.1.2.2 ST/WT Changeover Points of Time
The ST/WT changeover points of time for the current year, calculated from the customer
input, can be viewed with this display frame.
After a year change the clock system automatically recalculates the ST/WT
changeover points of time.
