Hope Eden Garden, Manual

Page: 7 / 45

7
ASSEMBLY INSTRUCTIONS
- Please check to make sure all the assembly parts have been included and are
intact prior to system assembly. All the parts are listed on Pg. 5 “Parts List”.
- Gloves are recommended for assembly of the system for PPE.
- During assembly make sure not to plug anything in until after the whole system
has been checked for correct assembly.
If you are placing your Eden Garden in a Basement:
- Place something underneath the reservoir to prevent it from being in direct
contact with the cold cement floor. If you have in floor heating, you can ignore
this step.
The cold concrete will pull all the heat out of the water in the reservoir and
stunt the plant growth substantially.
- We recommend putting an insulator between the reservoir and the cold floor.
This can be a sheet of plywood, or OSB, Styrofoam, even just carpet or
cardboard can help.
- If you are unable to put anything under the reservoir, we recommend
purchasing an aquarium heater that can be submerged. This will keep the water
temperature at an optimal temperature and guarantee great growth.
- Place the reservoir on a flat, non-slippery, level surface, and allow enough space
for you to safely maneuver around it. Please do not fill it with liquid yet