8
Pour the required amount
of solution into the tank.
Fill the clean water tank
with warm water
(max 40°C).
Hold the front of the
squeegee onto the edge
of the nozzle and push the
squeegee under the nozzle
until it clicks into place.
Lie the carpet washer
on its back and line up
the squeegee with the
nozzle.
CAUTION:
To prevent damage to wood floors and other hard floors, follow the flooring manufacturer's
cleaning recommendations. Inspect the floor surface for a worn finish, bare wood or separated joints.
It is not recommended to use the carpet washer on floors if any of these conditions exist.
Test on an inconspicuous area first.
Washing hard floors
IMPORTANT:
Hard floors should be dry vacuumed thoroughly before washing.
Before attaching the hard floor squeegee onto the carpet washer, either remove the tanks or make sure
the tanks are empty before lying the carpet washer on its back.
IMPORTANT:
For best results, clean hard floors in Quick Clean Mode.
OPERATION
