3.7 USE OF TOUCH CONTROL CLOCK PROGRAMMER
FUNCTION
HOW TO ACTIVATE IT
MINUTE
MINDER
COOKING
TIME
END OF
COOKING
HOWTO SWITCH ITOFF
WHAT IT DOES
WHAT IT IS FOR
•Push the central button
1 times
•Press the buttons "
-
" "
+
"
to set the required time
•Release all the buttons
•When the set time as
elapsed an audible alarm
is activated (this alarm will
stop on its own, however it
can be stopped immediately
by pressing the button)
SELECT.
•Sounds an alarm at the
end of the set time.
•During the process, the
display shows the
remaining time.
•Allows to use the oven as
alarm clock (could be
activated either with
operating the oven or with
out operating the oven)
•Push the central button
2 times
•Press the buttons
"
-
" or "
+
"
to set the lenght of
cooking required
•Release all buttons
•Set the cooking function
with the oven function
selector
•When the time is elapsed
the oven will switch off
automatically. Should you
wish to stop cooking earlier
either turn the function
selector to 0, or set time
to 0:00 (SELECT and
"
-
" "
+
" buttons)
•It allows to preset the
cooking time required
for the recipe chosen
•To check how long is left
to run press the SELECT
button 2 Times.
•To alter/change the
preset time press SELECT
and "
-
" "
+
" buttons
•Push any button to stop
the signal. Push the central
button to return to the clock
function
•Push the central button
3 times
•Press the buttons
"
-
" "
+
"
to set the time at which
you wish the oven to
switch off
•Release the buttons
•Set the cooking function
with the oven function
selector
•Push the central button 4 times
•Set time with
"
-
" "
+
"
buttons.
•Release all buttons.
ATTENTION:
The oven will only operate providing the clock is set.
•At the time set, the oven
will switch off. To switch
off manually, turn the oven
function selector to
position O.
•Enables you to set the
end of cooking time
•To check the preset time
push the central button
3 times
•To modify the preset
time press buttons
"
-
" "
+
"
WARNING : the first operation to carry out after the oven has been installed or following the interruption of
power supply (this is recognizable the display pulsating and showing
12:00
) is setting the correct time. This
is achieved as follows
3.8 SETTING THE CORRECT TIME
•This function is typically used
with “cooking time” function.
For example if the dish has to
be cooked for 45 minutes and
needs to be ready by 12:30,
simply select the required
function, set the cooking time
to 45 minutes and the end of
cooking time to 12:30.
•At the end of the cooking set
time, the oven will switch off
automatically and an audible
alarm will ring.
•Cooking will start
automatically at 11:45 (12:30
minus 45 mins) and will
continue until the pre-set end-
of-cooking-time, when the
oven will switch itself off
automatically.
WARNING.
If the END of cooking is
selected without setting the
length of cooking time, the
oven will start cooking
immediately and it will stop
at the END of cooking time
set.
KEY LOCK
•Child Lock function is
activated by touching Set (+)
for a minimum of 5 seconds.
From this moment on all
other function are locked and
the display will flash STOP
and preset time intermittently.
•Child Lock function is
deactivated by touching
touchpad Set (+) again for a
minimum of 5 seconds. From
this moment on all functions
are selectable again.
08 GB
00:00
Summary of Contents for HCM906/6BPP
Page 31: ......