Honsel Rivdom eVNG2 Operation Manual Download

Page: 31 / 32

Operation Manual

Edition: May 2021

Version 1

English

Transport / storage

Transport instructions:

1. Keep the machine in the original packaging during transport.

2. Before changing the working location, check that the working temperature range

specified in the technical data, can still be kept.

Storage instructions:

1. Keep the machine in the original packaging during storage.

2. Do not store the machine outdoors

Decommissioning / disposal

11.1

Decommissioning

1. Store the machine in the original packaging.
2. Before using the machine again, perform all maintenance operations described in

the maintenance schedule.

11.2

Disposal

Used batteries can be returned to HONSEL or delivered to GRS collection points.

CAUTION

Hazard due to wrong disposal of harmful substances

Risk of environmental damage caused by wrong disposal

►

Adhere all national and regional disposal rules and regulations.

►

Adhere all disposal instructions placed on the components or

described in related documentation.

Summary of Contents for Rivdom eVNG2

































Search results

Summary of Contents for Rivdom eVNG2

Reviews:

Related manuals for Rivdom eVNG2

Brands by name

Popular brands

Honsel Rivdom eVNG2, Operation Manual

Search results

Summary of Contents for Rivdom eVNG2

Reviews:

Related manuals for Rivdom eVNG2

Brands by name

Popular brands