Honeywell VX6, Reference Manual, Page: 34 / 356

14 Bluetooth
VX6 Reference Guide E-EQ-VX6RG-F
Bluetooth
Access: Start | Settings | Control Panel | Bluetooth or Bluetooth icon
in taskbar or Bluetooth icon on desktop
or Tap the Bluetooth icon in the taskbar to open the Bluetooth LXEZ Pairing application.
The VX6 default Bluetooth setting is Enabled.
The LXE HX3
Bluetooth
®
module is designed to Discover and pair with nearby LXE Bluetooth
devices. Only LXE printers or scanners are recognized and displayed in the Bluetooth panel. All
other Bluetooth devices are ignored.
Prerequisite
The Bluetooth devices (printers and/or scanners) have been setup to allow them
to be “Discovered” and “Connected/Paired”. The SysAdmin is familiar with the
pairing function of the Bluetooth devices.
Figure 1-7 Bluetooth Devices Display – Before Discovering Devices
Initial Use
1. Select
Start | Settings | Control Panel | Bluetooth
or tap the Bluetooth icon in the taskbar or
on the desktop.
2. Tap the
Settings
Tab.
3. Change the
Computer Friendly Name
at the bottom of the Settings display. The Bluetooth
VX6 default name is determined by the LXE factory installed software version. LXE strongly
urges assigning every VX6 a unique name (up to 32 characters) before Bluetooth Discovery
is initiated.
4. Check or uncheck the VX6 Bluetooth options on the Settings tab.
5. Tap the OK button to save your changes or the X button to discard any changes.
See Also:
Chapter 3 – System Configuration,
section titled
Bluetooth.