Honeywell VX6, Reference Manual, Page: 286 / 356

266 Setup a New Device
VX6 Reference Guide E-EQ-VX6RG-F
Setup a New Device
LXE devices with the AppLock feature are shipped to boot in Administration mode with no
default password, thus when the device is first booted, the user has full access to the device and no
password prompt is displayed. After the administrator specifies the applications to lock, a
password is assigned and the device is rebooted or the hotkey is pressed, the device switches to
end-user mode.
Briefly, the process to configure a new device is as follows:
1. Connect an external power source to the device and press the Power button.
2. Adjust screen display, audio volume and other parameters if desired. Install accessories.
3. Tap
Start | Settings | Control Panel | Administration
icon.
4. Assign applications on the
Control
(single application) or
Application
(dual application) tab
screen.
5. Assign a password on the Security tab screen.
6. Select a view level on the Status tab screen, if desired.
7. Tap OK
8. Press the hotkey sequence to launch AppLock and lock the configured application(s).
9. The device is now in end-user mode.