Home
/
Honeywell
/
VX6
/
Reference Manual

Honeywell VX6, Reference Manual, Page: 134 / 356

Share

Page: 134 / 356

Honeywell VX6 Reference Manual Download Page 134

114

Control Panel Options

VX6 Reference Guide

E-EQ-VX6RG-F

Memory

Figure 3-30 System / Memory

Move the slider to allocate more memory for programs or storage. If there isn’t enough space for a
file, increase the amount of storage memory. If the VX6 is running slowly, try increasing the
amount of program memory. Adjust the settings and click the OK box to save the changes. The
changes take effect immediately.

Device Name

Figure 3-31 System / Device Name

The device name and description can be changed. Enter the name and description using either the
keypad or the Input Panel and tap OK to save the changes. The changes take effect immediately.

Copyrights

This screen is presented for information only. The Copyrights information cannot be changed by
the user.

«
...
132
133
134
135
136
...
»

Summary of Contents for VX6





































































































































































































































































































































































Reviews:

No comments