manualshive.com logo in svg

Honeywell VX6, Reference Manual, Page: 105 / 356

Share
Download
Honeywell VX6 Reference Manual Download Page 105

Control Panel Options 

85 

E-EQ-VX6RG-F 

VX6 Reference Guide 

Language and Fonts 

The 

Software

 tab displays any fonts built into the OS image. 

 

Figure 3-3  About Properties, Software 

The fonts built into the OS image are noted in the Language section of this tab: 

•

 

English only – No additional fonts are built into the OS 

•

 

Japanese 

•

 

Simplified Chinese 

•

 

Traditional Chinese 

•

 

Korean 

The above listed Asian fonts are ordered separately and built-in to the VX6 OS image. Built-in 
fonts are added to registry entries and are available immediately upon startup. Thai, Hebrew, 
Arabic and Cyrillic Russian fonts are available in the (English only) default (extended) fonts.  

When an Asian font is copied into the fonts folder on the /System folder; the font works for Asian 
web pages, the font works with RFTerm, the font does not work for Asian options in 

Regional 

Settings

 control panel, the font does not work for naming desktop icons with Asian names, the 

font does not work for third-party .NET applications, the font does not work for some third-party 
MFC applications. 

Summary of Contents for VX6





































































































































































































































































































































































Reviews:

No comments