Honeywell VX6, Reference Manual, Page: 176 / 356

156 Barcode
VX6 Reference Guide E-EQ-VX6RG-F
Symbology Settings
Processing features such as the stripping of characters, rejection based on data length and addition
of a prefix/suffix are specified by symbology allowing for different processing characteristics
depending on the type of barcode scanned. These settings are configured by clicking the
Symbology Settings button on the Barcode tab.
Figure 4-4 Scanner Properties / Barcode /Symbology Settings
The Symbology pulldown list determines the symbology which is being customized. The entries
in the pulldown list are dependent on the Code ID type selected on the Barcode tab.
When All is selected, the changed settings become the defaults for all symbologies that have not
been previously customized.
If any settings have been customized for an individual symbology, that symbology has an asterisk
(*) beside its name in the list. Once configured, the specified symbology uses the entries on its
individual screen. The default (All) settings have no effect on a previously customized
symbology.
Symbology settings are saved when the OK button is clicked. Settings are also saved when a new
Symbology is selected from the Symbology drop-down list.
Use the Clear button to erase any customized entries, as follows:
•
If the Clear button is clicked while a specific symbology is selected, any
customization for that symbology is erased and the asterisk (*) is removed. The
symbology then uses the settings specified for All.
•
If the Clear button is clicked while All is selected, a confirmation box is displayed.
If confirmed, the process clears all symbology customizations and all asterisk (*)
indicators. All symbologies are reset to their factory defaults.