Honeywell Vuquest 3330, User Manual

Page: 59 / 240

Vuquest 3320g User Guide 43
When using Preferred Symbology (page 3-50), a lower priority symbol must be
centered on the aiming pattern to be read in Streaming Presentation Mode.
Mobile Phone Read Mode
When this mode is selected, your scanner is optimized to read bar codes from
mobile phone or other LED displays. However, the speed of scanning printed bar
codes may be slightly lower when this mode is enabled. You can enable Mobile
Phone Reading for either a hand held device, or for a hands-free (presentation)
application.
Note: To turn off Mobile Phone Read Mode, scan a Manual or Serial Trigger Mode bar code
(see page
37 ).
Hands-Free Time-Out
The Presentation Mode is referred to as “hands-free” mode. If the scanner’s button
is pushed when using a hands-free mode, the scanner changes to manual trigger
mode. You can set the time the scanner should remain in manual trigger mode by
setting the Hands-Free Time-Out. Once the time-out value is reached, (if there
have been no further button pushes) the scanner reverts to the original hands-free
mode.
Scan the Hands-Free Time-Out bar code, then scan the time-out duration (from 0-
300,000 milliseconds) from the inside back cover, and Save.
Default = 5,000 ms.
Streaming Presentation
Mode - Enhanced
Hand Held Scanning - Mobile
Phone
Streaming Presentation -
Mobile Phone
Hands-Free Time-Out