Honeywell Vuquest 3310g, User Manual

Page: 54 / 278

3 - 4
LED – Good Read
The LED indicator can be programmed On or Off in response to a good
read. Default = On.
Number of Beeps – Good Read
The number of beeps of a good read can be programmed from 1 - 9. The
same number of beeps will be applied to the beeper and LED in response
to a good read. For example, if you program this option to have five beeps,
there will be five beeps and five LED flashes in response to a good read.
The beeps and LED flashes are in sync with one another. To change the
number of beeps, scan the bar code below and then scan a digit (1-9) bar
code and the
Save bar code on the Programming Chart inside the back
cover of this manual. Default = 1.
Number of Beeps – Error
The number of beeps and LED flashes emitted by the scanner for a bad
read or error can be programmed from 1 - 9. For example, if you program
this option to have five error beeps, there will be five error beeps and five
LED flashes in response to an error. To change the number of error beeps,
scan the bar code below and then scan a digit (1-9) bar code and the
Save
bar code on the Programming Chart inside the back cover of this manual.
Default = 1.
* LED - Good Read On
LED - Good Read Off
Number of Good Read Beeps/LED Flashes
Number of Error Beeps/LED Flashes