5 - 28
EAP-TLS
To use EAP-TLS, make sure the following profile options are used.
1.
Enter the
SSID
of the Access Point assigned to this profile
2.
Set
Auth Type
to
Open
3.
Set
WPA
as follows:
•
Select
WPA/WPA2
to use either TKIP/AES or AES-CCMP
•
Select
WPA2
to use AEX-CCMP
4.
Set
Encryption
to either
TKIP/AES
or
AES-CCMP
depending on WPA type selected
5.
Set
Authentication
to
EAP-TLS
See
Sign-On vs. Stored Credentials
(page 5-13) for information on entering credentials.
Scroll down to enter credentials.
•
No entries except the User Certificate Filename and the CA Certificate Filename are necessary for Sign-On
Credentials as the user will be prompted for the User Name when connecting to the network.
•
For Stored Credentials, User Certificate Filename and the CA Certificate Filename must be entered.
Enter these items as directed below.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Summary of Contents for Thor VX9
