5 - 24
WPA/LEAP
To use WPA/LEAP, make sure the following profile options are used.
1.
Enter the
SSID
of the Access Point assigned to this profile
2.
Set
Auth Type
as follows:
•
If the Cisco/CCX certified AP is configured for open authentication, set
Auth Type
to
Open
.
•
If the AP is configured to use shared key or passphrase, set
Auth Type
to
Shared
.
3.
Set
WPA
as follows:
•
Select
WPA/WPA2
to use either TKIP/AES or AES-CCMP
•
Select
WPA2
to use AEX-CCMP
4.
Set
Encryption
to either
TKIP/AES
or
AES-CCMP
depending on WPA type selected
5.
Set
Authentication
to
LEAP
See
Sign-On vs. Stored Credentials
(page 5-13) for information on entering credentials.
Scroll down to enter credentials. No entries are necessary for Sign-On Credentials as the user will be prompted for the
Username and Password when connecting to the network.
Enter the Domain\Username (if the Domain is required), otherwise enter the Username.
Summary of Contents for Thor VX9
