Honeywell Thor VX9 User Manual Download Page 44

Page: 44 / 198

4 - 2

Accessing the BIOS Setup

For assistance in determining the type of BIOS installed on your Thor VX9, contact

Note: The “Press F2 to Enter Setup” or the “Press Del to run Setup” message may be disabled in the BIOS. The F2 key or

the Del key still has the same function when the display of the message is disabled.

AMI BIOS

When you turn an Thor VX9 with

AMI BIOS

on, the unit starts to boot. Watch the bootup sequence and when the fol-

lowing is displayed:

Press DEL to run Setup

Press the

Del

key.

Follow the on screen prompts for cursor movement, allowable values, online help, etc.

Phoenix BIOS

When you turn an Thor VX9 with

Phoenix BIOS

on, the unit starts to boot. Watch the bootup sequence and when the

following is displayed:

Press F2 to Enter Setup

Press the

key.

Follow the on screen prompts for cursor movement, allowable values, etc.

Identifying Drives in the Thor VX9

AMI BIOS

The

IDE Configuration

menu identifies the drives detected in the Thor VX9. The default is for all drives to be automat-

ically detected.

Phoenix BIOS

The

Main

menu identifies the drives detected in the Thor VX9. The default is for all drives to be automatically detected.

Integrated Devices

AMI BIOS

The

Onboard Device Configuration

menu contains options for integrated devices like the serial ports and audio con-

troller.

Legacy USB support is configured on the

USB Configuration

menu.

Phoenix BIOS

The

Advanced

menu contains configuration options for integrated devices like the serial ports, onboard LAN and Leg-

acy USB support.

Summary of Contents for Thor VX9







































































































































































































Search results

Summary of Contents for Thor VX9

Reviews:

Related manuals for Thor VX9

Brands by name

Popular brands

Honeywell Thor VX9, User Manual

Search results

Summary of Contents for Thor VX9

Reviews:

Related manuals for Thor VX9

Brands by name

Popular brands