Honeywell Thor VX9, User Manual, Page: 67 / 198

5 - 5
Delete
Tap Delete to delete the currently highlighted profile in the Profile: drop down box. Tap Yes to delete the
profile or No to exit without deleting.
Note: You cannot delete the currently active profile.
Parameters
The items on the Parameters tab only affect the selected profile.
When a property is selected from the list either a text box or a pull down list is displayed to the right for
the entry of a value for that property. After changing the desired properties, tap the Commit button.
Property
Default
Value
Explanation
Profile
Name Blank The name entered when the profile was created. The profile can be re-
named with this option.
SSID Blank A string of up to 32 alphanumeric characters. Establishes the Service Set
Identifier (SSID) of the WLAN to which the client connects.
Client Name Blank A string of up to 16 characters. The client name is assigned to the network
card and the device using the network card. The client name may be passed
to networking wireless devices, e.g. Access Points.
Tx Power Maximum Maximum setting regulates Tx power to the Max power setting for the current
regulatory domain.
Options are: Maximum, 10%, 25%, 50%, 75%.
Power Save Fast Power save mode.
Options are: Constantly Awake Mode (CAM), Maximum (power saving
mode) and Fast (power saving mode). When using power management, use
FAST for best throughput results.
Radio Mode BGA Rates
Full
Specify 802.11a, 802.11b and/or 802.11g rates when communicating with
the AP. The options displayed for this parameter depend on the type of radio
installed in the mobile device.
Options:
B rates only (1, 2, 5.5 and 11 Mbps)
BG Rates Full (All B and G rates)
G rates only (6, 9, 12, 18, 24, 36, 48 and 54 Mbps)
Ad Hoc (when connecting to another client device instead of an AP)
Default:
BG Rates Full
Auth Type Open 802.11 authentication type used when associating with the Access Point.
Options are: Open or Shared.
WPA None None, WPA/WPSA2, WPA2
Encryption None Type of encryption to be used to protect transmitted data.
Options are: None, WPA TKIP, AES-CCMP, or WEP.
Authentica-
tion None Extensible Authentication Protocol (EAP) type used for 802.1x authentica-
tion to the Access Point.
Options are: None, LEAP, EAP-FAST, PEAP-MSCHAP, PEAP-GTC, EAP-
TLS, EAP-TTLS, PEAP-TLS, or PSK.
Fast Reauth None None, PMK, CCKM
Additional profile entires may be present depending on the encryption and authentication options select-
ed.