Honeywell Thor VX8 Reference Manual Download

Page: 89 / 228

Summit Client Utility

Note:

When making changes to profile or global parameters, the device should be restarted afterwards.

Access:

Start > Programs > Summit > SCU

SCU Icon on Desktop

Summit Tray Icon (if present) or

Wi-FI Icon in the Windows Control Panel (if present)

The

Main Tab

provides information, admin login and active profile selection.

Profile specific parameters are found on the

Profile Tab

. The parameters on this tab can be set to unique values for each profile.

This tab was labeled Config in early versions of the SCU.

The

Status Tab

contains information on the current connection.

The

Diags Tab

provides utilities to troubleshoot the radio.

Global parameters are found on the

Global Tab

. The values for these parameters apply to all profiles. This tab was labeled

Global Settings in early versions of the SCU.

Help

Help is available by clicking the ? icon in the title bar on most SCU screens.

The SCU help may also be accessed by selecting

Start > Help

and tapping the

Summit Client Utility

link. The SCU does

not have to be accessed to view the help information using this option.

4-3

Summary of Contents for Thor VX8





































































































































































































































Search results

Summary of Contents for Thor VX8

Reviews:

Related manuals for Thor VX8

Brands by name

Popular brands

Honeywell Thor VX8, Reference Manual

Search results

Summary of Contents for Thor VX8

Reviews:

Related manuals for Thor VX8

Brands by name

Popular brands