manualshive.com logo in svg

Honeywell TELEPHONE ACCESS MODULE W8735D, Owner'S Manual, Page: 7 / 36

Share
Download
Honeywell TELEPHONE ACCESS MODULE W8735D Owner'S Manual Download Page 7

7

69-2028—01

IMPORTANT

Set the proper number of rings for the TAM to 

avoid interfering with voice mail or an answering 

machine.

To access the TAM when the phone line is shared 

set the number of rings the TAM will wait until it 

answers to one more than the device sharing the 

line:

For example, If your answering machine answers 

in four rings, set the TAM to answer in five rings.

1.

Call the TAM and let the phone ring two times.

2.

Hang up.

3.

Call again within 30 seconds.

4.

The TAM picks up the second call.

5.

The TAM voice message asks you to respond to, 

“

Welcome to the telephone access center. 

Please enter your pass code followed by the # 

key

.”

Welcome Announcement

Fig. 3. Dial-in Sequence.

When the TAM answers the call, you hear “

Welcome 

to the telephone access center

.” next you hear:

a. A voice prompt to enter your pass code 

followed by the # key

b. The alert messages (if any)

c. The current date and time (if already set)

d. The outdoor temperature (if available)

e. The indoor humidity (if available)

The remainder of this section describes each of the 

five listed items (a through e).

Call in to the Telephone Access Module

Enter your pass code

Date/Time

Listen for:

Active Alert Message 

(if any)

Outdoor Temperature 

(if available)

Indoor Humidity 

(if available)

M28142

Summary of Contents for TELEPHONE ACCESS MODULE W8735D





































Reviews:

No comments