manualshive.com logo in svg

Honeywell TELEPHONE ACCESS MODULE W8735D, Owner'S Manual, Page: 11 / 36

Share
Download
Honeywell TELEPHONE ACCESS MODULE W8735D Owner'S Manual Download Page 11

11

69-2028—01

Entering the Main Menu

IMPORTANT

Your installer may have configured your 

Telephone Access Module. Before changing any 

settings, discuss the changes with your installer.

To enter the Main menu:

1.

Call your Telephone Access Module.

2.

Enter your pass code.

• If your pass code is not yet programmed, you 

hear “

The pass code is not programmed

.” 

(See “Pass Code Menu” on page 14 to 

change the pass code.)

3.

Listen to any active alerts.

4.

Listen to the date and time, announcements, 

and (if available) the outdoor temperature, and 

indoor humidity. announcements.

5.

You hear “

Main menu

” followed by the main 

menu selections. To make a selection, you enter 

the menu number.

Fig. 4. Main Menu Selections.

Enter:

Thermostat Menu
   

Single Thermostat Settings

   Global Thermostat Settings

1

Time and Date Menu
   

hh, mm & mm, dd, yyyy

2

Passcode Menu
   

Change the System Passcode

3

Alert Menu
   

Set alert priority and dial out time

   Retrieve alert history

4

Call and Ring Menu
   

Configure the dial-out phone numbers

   Configure the number of rings

5

Limit Menu
   

Configure temperature & humidity limits

   Set factory default limits

6

Zone Menu
   

Assign zone names

   Set zone announcement options

7

Repeat User Menu

9

Exit (Disconnect)

#

M28143

Summary of Contents for TELEPHONE ACCESS MODULE W8735D





































Reviews:

No comments