22
69-2028—01
Main
and
Backup
and
possibly
Contractor
b
telephone numbers
Alert is cleared if either Main or Backup
acknowledges the alert.
If Main or Backup acknowledges the alert,
the Contractor number is not dialed.
Contractor alert is cleared once
acknowledged by Contractor.
b
Dial-out procedure is attempted to the Main and Backup numbers
every 30 minutes for High priority alerts until the alert is
acknowledged by either the Main or the Backup number.
If the Main or Backup number is not reached on the first dial-out, the
dial-out procedure is attempted to the Contractor number every 30
minutes for High priority alerts until the alert is acknowledged by the
Main, Backup, or Contractor.
a
After the first dial-out attempt, the power outage alert does not dial-out again.
b
The contractor telephone number is intended for use when you have an agreement with your heating and air
conditioning contractor to monitor the alerts sent by your Telephone Access Module.
c
The contractor may use a special code (last five digits of the entered contractor telephone number) to access
the TAM Alert History only. Without the full access code, the contractor cannot access any other features.
Table 3. Dial-Out Procedure. (Continued)
When these numbers
are
programmed,
the TAM dials-out
If Acknowledged
If Not Acknowledged
a