17
69-2028—01
Selecting a Call and Ring Menu Item
Press the number key for the desired action, and
refer to that numbered section (1 to 6) below for more
information.
1. Changing the Number of Rings
The ring setting determines how many rings the
Telephone Access Module hears before answering.
The factory default setting is
four
rings.
Set the proper number of rings for the TAM to avoid
interfering with voice mail or an answering machine.
See “Calling Your Telephone Access Module” on
page 6 for an example.
information on how to
determine the number of rings
needed.
The announcement is: “
Press a key from 2 to 9 to set
the number of rings before the device will answer a
call
.”
1.
Enter a digit from 2 to 9 for the number of rings.
• You hear “
Incoming calls will be answered
after (__) rings. Press the # key if this is
correct or press zero to change the ring
setting again
.”
2.
Press the # key to confirm your change or press
0 (zero) to re-enter a different number of rings.
If the Ring Setting is not entered correctly, the TAM
announces that you have entered an “Invalid Setting.”
Follow the voice prompts and the above instructions
to enter a new Ring Setting.
2. Entering or Changing the Home Telephone
Number
The home telephone number identifies the location
where the TAM is installed. This is especially useful if
you have multiple TAMs installed at different
residences such as your home and cabin, or if a
contractor is monitoring your TAM.
The announcement is: “
Current home phone number
is (_____). Press # if this is correct. Press zero to
change the home phone number again
.”
1.
Press 0 (zero) to change the number.
• You hear “
Please enter the home phone
number followed by the # key
.”
2.
Enter the telephone number to which the TAM is
connected and press the # key.
• You hear “
You entered (_____) for the home
phone number. Press # if this is correct. Press
zero to change the home phone number
again
.”
3.
Press the # key to confirm your change.
80
90
70
60
90
80
70
60