ST699 ELECTRONIC DUAL ZONE TIMER
EN0R 8439 R0
2
DIMENSIONS
Mounting
Remove the subbase from the timer by depressing the
securing clip A and pulling the two halves apart. See fig. 1
The ST699 can either be mounted onto the wall surface or a
flush mounted UA1 (with 60.3 mm pitch mounting holes)
using the screws supplied.
IMPORTANT
1. The installer must be a trained service
engineer
2. Disconnect the power supply before beginning
installation
INSTALLATION
SPECIFICATIONS
Product type
:
Electronic dual zone timer
Power supply
:
230 V~ (±10%), 50 HZ
Power reserve
:
Rechargeable battery with 7 days
backup following a 24 hour charging
period
Switch rating
:
2 x SPDT potential free
3 A resistive @ 230 V~ (± 10%), 50 Hz
3 A inductive @ 0.6 pf
Programme
:
24-hour with two ON/OFF periods daily
Programme
resolution
:
10 minutes
Programme day
:
03.00 AM to 02.50 AM (on the next day)
Override
:
Advance next programme time
(change)
Wiring
:
Surface or single wallbox (UA1 size)
Wiring access
:
Rear or bottom edge (surface wiring
access)
Wire gauge
:
0.75 to 2.5 mm
2
two
max. per terminal
Dimensions
:
100 x 100 x 38 mm (w x h x d)
Protection class
:
IP20 (IEC 529)
Environmental
:
Operating temperature range 0 to 45
o
C
Shipping and storage temperature
range -20 to 55
o
C
Humidity range 0 to 90% rh, non-
condensing
Approvals
:
Designed to meet European CEN
approval EN60730
Life
:
7 years minimum
Fig. 1
ORDERING SPECIFICATION
ST699B1002
