manualshive.com logo in svg

Honeywell RS-232, Reference Manual

Share
Download
Honeywell RS-232 Reference Manual Download Page 2

ii

RS232 Communications Reference Manual

8/99

Copyright, Notices, and Trademarks

Printed in U.S.A. – © Copyright 1999 by Honeywell Inc.

Revision B – 8/99

While this information is presented in good faith and believed to be
accurate, Honeywell disclaims the implied warranties of
merchantability and fitness for a particular purpose and makes no
express warranties except as may be stated in its written agreement
with and for its customer.

In no event is Honeywell liable to anyone for any indirect, special or
consequential damages. The information and specifications in this
document are subject to change without notice.

UMC800 Universal Multi-loop Controller is a trademark of Honeywell
Inc.

Honeywell

Industrial Automation and Control

Automation College

1100 Virginia Drive

Fort Washington, PA. 19034

Summary of Contents for RS-232

























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands