Press and hold the
power button for 3
seconds to turn on
the device.
Adjust display pod so you
can clearly see all 4 corners
of the display and then lock
into position using ring.
Turn on the HMT-1
1
2
3
4
5
6
7
8
9
10
1. The HMT-1 will automatically launch into configuration mode.
2. Point the camera at the QR code you generated in Step 1.
3. The HMT-1 will detect the QR code and configure the device.
The HMT-1 is controlled by voice and head motion.
Say what you see on the screen and move your head
to navigate. If you get stuck say
Show Help
.
Say What You See
1
2
3
4
5
6
7
8
9
10
Scan the Configuration QR Code from the HMT-1
1
2
3
4
5
6
7
8
9
10
Note:
Once the device connects to WiFi an update of RealWear Device Agent may occur.
Note:
To change your language, press and hold the
action button on the side of the HMT-1. The language
selection will switch automatically, let go of the button
when the language you want is selected.