VISIOCAM
1
69-2108EFS—01
Features
DOOR CAMERA FEATURES
CAMERA LENS
CONFIDENCE LIGHT
– VIEWS CALLERS
INFRARED LEDS
– ALLOWS THE CAMERA
TO ‘SEE IN THE DARK’ IN
MONOCHROME
CALL BUTTON
– ACTIVATES THE
CHIME TUNE
AND CAMERA
NAME PLATE
– FOR DISPLAYING YOUR
NAME OR OTHER INFORMATION
LIGHT SENSOR
– DETECTS AMBIENT LIGHTING AND
SWITCHES CAMERA FROM COLOR
TO MONOCHROME IN LOW LIGHT
– ILLUMINATES WHEN
CALL BUTTON IS
PRESSED TO
REASSURE THE
CALLER THAT THE
UNIT IS WORKING
CAMERA BASE
– REMOVES FOR
WALL MOUNTING
MOVEMENT SENSOR
(PIR)
RECEIVER FEATURES
SCAN BUTTON
– LOOKS FOR
CONNECTED
CCTV-TYPE CAMERAS
TUNE SELECTION
BUTTON
– SELECTS THE
CHIME TUNE FOR
THE DOOR CAMERA
CHIME
VOLUME
Scan
RCA SOCKET
– TO CONNECT TO
A TV SET (OPTIONAL)
ANTENNA
– RECEIVES THE
SIGNAL FROM
THE CAMERA
DISPLAY
– SCREENS THE CAMERA
IMAGE FOR APPROX. 30
SECONDS AFTER THE CALL
BUTTON IS PRESSED
DISPLAY
BRIGHTNESS
MIC VOLUME
VISIOCAM
– FOR FUTURE USE
TUNE SELECTION
BUTTON
– FOR SECOND
CAMERA/PUSH
BATTERY INDICATOR
CHIME FLASHER
Pre-installation setup
Before fixing the door camera in place, set up and test the system as follows:
Install the batteries in the door camera
Note:
The door camera has a built
in tamper switch to help prevent
theft. Once the batteries have been
inserted, the
confidence light flashes
and the tamper alert sounds on the
receiver.
1. Remove the two screws at the
base of the camera unit and
unhook and release the camera
base, pulling it away from the
lower end first.
3
1
2
NAMEPLATE
69-2108EFS_A.indd 1
11/30/2007 1:51:45 PM
