background image

T7200D,E, T7300D,E,F AND Q7300 SERIES 2000 PROGRAMMABLE COMMERCIAL THERMOSTATS AND SUBBASES

63-4355—1

33

T7300/Q7300 Series 2000 Cross Reference 

(Continued).

Model Number

Figure

Number

Description

Trade

Replacement

Remarks

T7300D

Multistage conventional thermostat used with Q7300A,G, or L Subbase.

T7300D2007

Refer to

subbase

Honeywell logo; TRADELINE® model;
remote sensor capability; system settings:
Heat-Off-Cool-Auto; taupe color.

T7300D2007

Direct replacement for
T8621 Thermostats.  

T7300E

Multistage heat pump thermostat used with Q7300C or D Subbase.

T7300E2020

Refer to

subbase

Honeywell logo; TRADELINE® model;
remote sensor capability; system settings:
Em Heat-Heat-Off-Cool-Auto; taupe color.

T7300E2020

Direct replacement for
T8611M Thermostats.

T7300F

Multistage thermostat for heat pump (Q7300C or D Subbase) and conventional  
(Q7300A,G or L Subbase) applications.

T7300F2002

Refer to

subbase

Honeywell logo; SUPER TRADELINE®
model; remote sensor and discharge air
sensor capability; no system or fan settings;
taupe color.

T7300F2002

T7300F2010

Refer to

subbase

Honeywell logo; SUPER TRADELINE®
model; remote sensor and discharge air
sensor capability; system settings:
configurable; fan settings: Auto-On;  
taupe color.

T7300F2010

Summary of Contents for Q7300









































Reviews: