manualshive.com logo in svg

Honeywell PX4i, User Manual, Page: 97 / 158

Share
Download
Honeywell PX4i User Manual Download Page 97

PX4i and PX6i High Performance Printer User Guide

85

To upgrade using a serial or USB connection

Use Fingerprint or IPL commands to send the upgrade file to your printer. 

For help, see the 

Fingerprint Command Reference Manual

 or the 

IPL Command 

Reference Manual

. 

To upgrade using an Ethernet or 802.11 network connection

1. Start your web browser application.

2. In the address field, enter the IP address of your printer.

3. Press Enter. Your printer’s home page appears.

4. From the menu at the top of the page, click Maintenance. The firmware upgrade 

screen appears.

5. Click Browse and browse to the location of the firmware upgrade file.

6. Double-click the file, and then click Upgrade.

Downloading Fonts and Graphics

The printer supports 15 scalable Unicode TrueType and TrueDoc fonts as standard. 
The Unicode standard allows the use of special characters for various languages 
including non-Latin fonts, such as Arabic, Cyrillic, Chinese (including enhanced 
Simplified Chinese GB18030), Japanese, Korean, and Hebrew.

You can download additional fonts to the printer’s Flash memory using:

•

PrintSet. You can download PrintSet from the downloads page for the printer on 
the Honeywell website at www.honeywellaidc.com.

•

Fingerprint or IPL commands. For help, see the 

Fingerprint Command Reference 

Manual

 or the 

IPL Command Reference Manual

. 

•

a CompactFlash card or external 2 GB USB mass storage device.

Summary of Contents for PX4i































































































































































Reviews:

No comments