manualshive.com logo in svg

Honeywell PX4i, User Manual, Page: 96 / 158

Share
Download
Honeywell PX4i User Manual Download Page 96

84

PX4i and PX6i High Performance Printer User Guide

To upgrade using PrintSet

1. Download the latest version of PrintSet from the Honeywell website at 

www.honeywellaidc.com.

2. Select File > Add Printer. The Add Printer Wizard starts.

3. Under My Printers, select your printer.

4. Go to Printer > Firmware Wizard. 

5. Follow the steps to update your firmware.

To upgrade using a CF card

1. Copy the firmware upgrade file to a CF card.

2. Insert the CF card in the appropriate slot on the back of your printer.

3. Turn on your printer.

To upgrade using a USB storage device

1. Turn on your printer.

2. Verify the USB storage device is supported by your printer. Insert the USB 

storage device in the appropriate slot on the back of your printer. On the display 
screen, one of the following status messages briefly appears:

•

USB memory stick connected

•

USB memory stick not supported

Note:

If not status message appears when you insert the USB storage device, remove and 
reinsert the USB storage device. To manually verify the USB storage device is 
supported, "Using a USB Mass Storage Device" on page 60.

3. Insert the USB storage device in the appropriate slot on your PC.

4. In the root directory of the USB storage device, create a folder named 

“upgrade.”

5. Copy the firmware binary upgrade file to the upgrade folder on the USB storage 

device.

Note:

The printer supports 8.3 binary filenames, which mean the filename can have up to 
eight characters and a .bin extension.

6. Insert the USB storage device in the appropriate slot on the back of your printer. 

The upgrade starts. On the display screen, the status message, “Time Out,” 
appears.

7. When the upgrade is complete, the status message, “Check Integrity,” appears. 

Remove the USB storage device. You may need to restart your printer.

Summary of Contents for PX4i































































































































































Reviews:

No comments