VGS Infiammabili
Manuale utente – User manual
Pag. 9
VGS-EXP_manu
Doc. M-896.1-VGS-EXP-ITA-ENG Rev A.5
NOTIFIER ITALIA
PROGRAMMAZIONE JUMPERS PER SOGLIE DI ALLARME
JUMPERS PROGRAMMING FOR ALARM THRESHOLDS
Configurando diversamente i dip-switch presenti sulla
scheda base si possono modificare le soglie di allarme.
Anche disponendo della scheda opzionale a 3 relè è
possibile modificare le soglie di intervento dei relè come
indicato nella tabella seguente.
By modifying the dipswitch configuration on the
motherboard, different alarm thresholds might be
obtained.
It is also possible to modify the relay intervention when
using the 3-relay card, as per the following table
DIP Switch 1
– vedi paragrafo “MANUTENZIONE” nella sezione “Ripristino dei dati ai valori di default”
DIP Switch 1
– see paragraph “MAINTENANCE”, part “Data reset to default parameters”
Per Centrali MINIGAS vedi nota pagina precedente
For MINIGAS Panels see note previous page