manualshive.com logo in svg

Honeywell NOTIFIER RP-2002C, Instruction Manual, Page: 10 / 160

Share
Download
Honeywell NOTIFIER RP-2002C Instruction Manual Download Page 10

10

RP-2002 Series Manual —

 P/N 53039:E6  1/26/2017

It is imperative that the installer understand the requirements of the Authority Having Jurisdiction 
(AHJ) and be familiar with the standards set forth by the following regulatory agencies:

•

Underwriters Laboratories Standards

•

NFPA 72 National Fire Alarm Code

•

CAN/ULC - S527-11 Standard for Control Units for Fire Alarm Systems  

     

NFPA Standards
This Fire Alarm Control Panel complies with the following NFPA Standards:

NFPA 12 CO

2

 Extinguishing Systems (High Pressure Only)

NFPA 12A Halon 1301 Extinguishing Systems
NFPA 17 Dry Chemical Extinguishing Systems
NFPA 17A Wet Chemical Extinguishing Systems
NFPA 72 National Fire Alarm Code for Local Fire Alarm Systems and Remote Station 
Fire Alarm Systems (requires an optional Remote Station Output Module)
NFPA 2001 Clean Agent Fire Extinguishing Systems
NFPA 2010 Fixed Aerosol Fire-Extinguishing Systems     

Underwriters Laboratories Documents for Reference:

UL 38 Manually Actuated Signaling Boxes
UL 217 Smoke Detectors, Single and Multiple Station
UL 228 Door Closers–Holders for Fire Protective Signaling Systems
UL 268 Smoke Detectors for Fire Protective Signaling Systems
UL 268A Smoke Detectors for Duct Applications
UL 346 Waterflow Indicators for Fire Protective Signaling Systems
UL 464 Audible Signaling Appliances
UL 521 Heat Detectors for Fire Protective Signaling Systems
UL 864 Standard for Control Units for Fire Protective Signaling Systems
UL 1481 Power Supplies for Fire Protective Signaling Systems
UL 1638 Visual Signaling Appliances
UL 1971 Signaling Devices for Hearing Impaired

CAN/ULC - S524-01 Standard for Installation of Fire Alarm Systems

This Class (A) digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe (A) est conforme à la norme NMB-003 du Canada.

Other:

Canadian Electrical Code, Part I
NEC Article 250 Grounding
NEC Article 300 Wiring Methods
NEC Article 760 Fire Protective Signaling Systems
Applicable Local and State Building Codes
Requirements of the Local Authority Having Jurisdiction (LAHJ)

Notifier Documents

Notifier Device Compatibility Document

Document #15378

411UD Manual

Document #50759

411UDAC Manual

Document #51073

CHG-75 Battery Charger Manual

Document #51315

CHG-120 Battery Charger Manual

Document #50641

N-ANN-80 Product Installation Doc.

Document #52986

N-ANN-(R)LED Product Installation Doc.

Document #53317

N-ANN-I/O Product Installation Doc.

Document #151243

N-ANN-RLY Product Installation Doc.

Document #53318

N-ANN-S/PG Product Installation Doc.

Document #151424

This product has been certified to comply with the requirements in the Standard for Control Units and Accessories for Fire 
Alarm Systems, UL 864, 9th Edition. Operation of this product with products not tested for UL 864, 9th Edition has not 
been evaluated. Such operation requires the approval of the local Authority Having Jurisdiction (AHJ).

This product has been certified to comply with the requirements in the Standard for Control Units for Fire Alarm Systems, 
ULC-S527, 3rd Edition. Operation of this product with products not tested for ULC-S527 3rd Edition has not been 
evaluated. Such operation requires the approval of the local Authority Having Jurisdiction (AHJ).

Before proceeding, the installer should be familiar with the following documents.

Summary of Contents for NOTIFIER RP-2002C

































































































































































Reviews:

No comments