Honeywell NOTIFIER NCD, Instruction Manual

Page: 28 / 40

28 NCD Instruction Manual — P/N LS10210-051NF-E:C 2/18/2019
Programming Custom Actions
3.6 Custom Actions
Custom Actions are virtual buttons that can be mapped and employed to manually control common system commands such as
enable/disable points. Custom Actions are completely programmable and can be user defined within VeriFire Tools.
Disable Points/Functions
To disable a
group of points, special functions, or
zones tap on the touch point
CUSTOM
ACTIONS
, select the point to disable and
tap on the touch point
DISABLE
. The
ENABLE
touch point will be grayed out if
the point is enabled.
Enable Points/Functions
To enable a
group of points, special functions or
zones from the main menu tap on the
touch point
CUSTOM ACTIONS
, select the
group of points to enable and tap on
touch point
ENABLE
. The
DISABLE
touch
point will be grayed out if the group of
points is disabled and there will be a trou-
ble message on the panel stating which
point is disabled.
Turn ON/OFF points
To turn ON or
OFF a group of points from the main
menu tap on the touch point
CUSTOM
ACTIONS
, select the point to turn ON/OFF
and tap on either
TURN ON
or
TURN OFF
.
One will be grayed out depending on
whether the point is ON or OFF.
Figure 3.14 Custom Actions Screen
Silence Reset
Tue 01/22/18
02:38:06PM
Master
System Normal
Ack
SIGNALS
SILENCED
OTHER
DISABLE
TROUBLE
SUPERVISORY
CO ALARM
FIRE ALARM
Custom Actions
Menu - > Custom
Detectors Modules
Trouble Disable
Disable Active
Active
0%
0%
0%
0%
0%
0%
Trouble
Disable N210
Disable N210
Zones
- N210Z1
- N210Z10
- N210Z100
- N210Z200
- N210Z300
- N210Z400
- N210Z500
- N210Z600
DISABLE
DISABLE TURN ON
NOTE: The maximum number of actions that can be preformed at one time is eight (8)