Honeywell NetAXS, User Manual, Page: 22 / 105

2-4 www.honeywell.com
Configuring via the Web Server
Configuring the System
Reset Reboots the panel. A reset does not change the current
configuration in the database.
Cardholder Note 1 Specifies any information field you might want to put on
a card. For example, if you enter “Department” here, a
field labeled “Department” appears on the card. The user
who creates the card would then enter the cardholder’s
department name. See
Adding New Cards , page 36 .
Anti-Passback Enabled – Enables anti-passback, which prevents an
entrant to an area from passing his card back to another
potential entrant.
Local
– Enforces anti-passback only at doors configured
locally to the panel controlling the original card read.
Global – Enforces anti-passback at panels throughout the
NetAXS™ system after a successful card read at any one
of the system’s readers.
Forgiveness
– Causes all system codes to be reset at
midnight every day. This enables a cardholder who exited
the building in the evening without using his card to use
his card for entry the following morning.
Gateway Panel Addr Sets the panel address of the Gateway panel, or the panel
directly connected to the host system.
Web Session Timeout
Disabled
– Disables the timeout.
___ Minutes – Activates a web session timeout after the
specified number of minutes has elapsed.
Use PIN Enabled – Requires a valid PIN verification.
Free Egress Enabled – Configures the panel for free egress. Reader 1
activates output 1, reader 2 activates output 2, reader 3
activates output 3, and reader 4 activates output 4. Inputs
1, 3, 5, and 7 are egress defaults that activate outputs 1, 2,
3, and 4, respectively. Inputs 2, 4, 6, and 8 are status
defaults for outputs 1, 2, 3, and 4, respectively.
Table 2-1: Configuration > System > General Tab Fields (continued)
Parameter Description