Honeywell N568X, Integration Manual

Page: 21 / 72

3 - 1
3
Electrical
DC Characteristics
Operating Voltage
1.At least 3.0V must be maintained at the N56XX input connector during scanning.
2.At least 4.75V must be maintained at the N56XX input connector during scanning.
3.No RS232 option available.
Configuration Min Nominal Max Unit
RS232 Only
1 3.0 3.3 5.5 V
USB (Full Speed) Only
2.3 4.75 5.0 5.25 V
USB (High Speed) Only
2,3 4.75 5.0 5.25 V
Warning! Do not connect a flex strip to or disconnect a flex strip from the host interface connector when
power is present on the flex strip. This could damage the image engine.
Warning! When using the Micro-B connector, DO NOT apply power through the Flex connector (Pin 2 - Vin).
Doing so can cause harm to either the host or image engine.
!
!