Honeywell N568X, Integration Manual

Page: 17 / 72

1 - 7
If it takes 2 ms for the illumination to be full-on, in response to nFLASH_OUT, FLACON should be configured to 127 (2 ms
= 127 * 16.7 µS).
This signal is driven by an Open Drain NC7WZ07 device with a V
Omax
= 5.5V through the 100K pull up resistor on the
engine. It is capable of sinking 32 mA at Vin = 4.5V (N56XX supply voltage) or 24mA at Vin = 3.3V. It is not advised nor con-
ceivable to allow this signal to act as the drive source for external illumination.