Honeywell N568X, Integration Manual

Page: 11 / 72

1 - 1
1
Introduction and Installation
About the N56XX Decoded Out Image Engines
The N56XX decoded out engine is a miniature, CMOS imager-based (black/white or color) image capture and bar code imaging
module device. It is configured to be sold as a bracketed module or as the optics module and decoder board separately. The
modules are designed for easy integration into an OEM portable device.
The firmware implements an automatic shutter control to provide operation over a wide range of ambient light conditions. The
decoder board uses a high-speed microprocessor and memory system to support reading of 1D bar codes, 2D bar codes, and
OCR as well as image capture and transfer.
All models are of a modular design consisting of an optics module and a decoder board. The optics module consists of an array
sensor, imaging optics, and A/D converter to create a digital representation of the optical signal to be stored in RAM.
The systems may be ordered assembled with a mounting bracket or as separate components for custom mounting. The follow-
ing information is presented to assist you in integrating the N56XX module into an OEM application.
The following parts allow you to assemble your own unbracketed configuration:
Description Part Number
1.2" flex from the engine to the decoder PCB 100008340
2.2" flex from the engine to the decoder PCB 100008341
USB Decoder Board, USB Full-Speed interface N56XX DB USB1
USB Decoder Board, USB Hi-Speed interface N56XX DB USB2
232 Decoder Board, TTL-232 interface N56XX DB 232
Decoder
Board
nTRIG
nWAKE
nGRLED
nBEEPER
PWRDWN/nFLASH_OUT
RTS
CTS (D+)
TxD
RxD (D-)
GND
Vin
232INV
D-
D+
Vin
RESERVED
GND
Vcc
GND
I
2
C
Data
Timing
Image
Engine
Engine
Microcontroller
Illumination
LEDs
CMOS
Imager
Imaging
Lens
RS232
(USB
Full Speed)
Signals
Aimer
(Laser/LED)
USB Signals
(High Speed)