background image

GasAlertMicro 5/PID/IR Battery Charger

 [

English] Instruction Sheet

 

D5688/2 Page 

5  

Trimmed and folded dimensions: 4.125 (w) x 5.875 (H) 

 
 

 

Specifications 

Size:

  87 x 83.97 x 80.8 mm (3.4 x 3.3 x 3.2 in.) 

Weight:

  210 g (7.4 oz.) 

Operating temperature:

  10°C to 35°C (50°F to 95°F) 

Humidity:

  0 to 50%

 

Altitude:

  2000 m (6561.66 ft.)

 

Power:

  6 Vdc 

, 1.0 A

 

Charger status LED:

  Color-coded LED advises the following: charging, 

charging complete, and charger fault 

Charge time:

  Typically 3.5 hours 

Battery life:

  Typically 500 charges 

Pollution degree:

  2 

Installation category:

  

I

 

Certifications:

  Approved to both U.S. and Canadian standards by CSA 

International for use in ordinary locations.

 

This device complies with the FCC Part 15 and ICES-003 Canadian EMI 
requirements. Operation is subject to the following two conditions: 

1. 

This device may not cause harmful interference, and 

2. 

this device must accept any interference received, including 
interference that may cause undesired operation. 

This equipment has been tested and found to comply with the limits for a 
Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 
Canadian EMI requirements. These limits are designed to provide 
reasonable protection against harmful interference when the equipment is 
operated in a commercial environment. 

This equipment generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the instruction manual, 
may cause harmful interference to radio communications.  

Operation of this equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the 
interference at his/her own expense. 

a

 Warning 

This product is designed for installation in an indoor location 
only. All required National Electrical Codes and Safety 
Standards must be followed. 

 

Warranty 

LIMITED WARRANTY & LIMITATION OF LIABILITY 

BW Technologies by Honeywell (BW) warrants this product to be free from defects in material 
and workmanship under normal use and service for a period of two years, beginning on the date 
of shipment to the buyer. This warranty extends only to the sale of new and unused products to 
the original buyer. BW’s warranty obligation is limited, at BW’s option, to refund of the purchase 
price, repair, or replacement of a defective product that is returned to a BW authorized service 
center within the warranty period. In no event shall BW’s liability hereunder exceed the purchase 
price actually paid by the buyer for the Product. 
This warranty does not include: 

a) 

fuses, disposable batteries or the routine replacement of parts due to the 
normal wear and tear of the product arising from use; 

b) 

any product which in BW’s opinion, has been misused, altered, neglected or 
damaged by accident or abnormal conditions of operation, handling or use; 

c) 

any damage or defects attributable to repair of the product by any person 
other than an authorized dealer, or the installation of unapproved parts on 
the product; or 

The obligations set forth in this warranty are conditional on: 

a) 

proper storage, installation, calibration, use, maintenance and compliance 
with the product manual instructions and any other applicable 
recommendations of BW; 

b) 

the buyer promptly notifying BW of any defect and, if required, promptly 
making the product available for correction.  No goods shall be returned to 
BW until receipt by the buyer of shipping instructions from BW; and 

c) 

the right of BW to require that the buyer provide proof of purchase such as 
the original invoice, bill of sale or packing slip to establish that the product is 
within the warranty period. 

THE BUYER AGREES THAT THIS WARRANTY IS THE BUYER’S SOLE AND EXCLUSIVE 

REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, 

INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE.  BW SHALL NOT BE LIABLE FOR ANY SPECIAL, 

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS 

OF DATA, WHETHER ARISING FROM BREACH OF WARRANTY OR BASED ON 

CONTRACT, TORT OR RELIANCE OR ANY OTHER THEORY. 

Since some countries or states do not allow limitation of the term of an implied warranty, or 
exclusion or limitation of incidental or consequential damages, the limitations and exclusions of 
this warranty may not apply to every buyer. If any provision of this warranty is held invalid or 
unenforceable by a court of competent jurisdiction, such holding will not affect the validity or 
enforceability of any other provision.

 

 

Summary of Contents for M5-C01 Series







Reviews: