– 47 –
USER FUNCTIONS
USER FUNCTIONS
USER FUNCTIONS
USER FUNCTIONS
Automation
General Information
Automation is used to program triggers, home automation features, send Follow-Me or E-
mail messages of system events or program home automation features (Z-Wave) including
Rules and Scenes (if Z-Wave communications have been enabled). Up to 40 rules can be
programmed. Rules 1 through 20 are used for Triggers, Z-Wave Scenes and Follow-Me
Messages. Rules 21 through 40 are used to trigger Z-Wave Scenes and for E-mail notification
and are only accessible through TotalConnect Service. Check with your Installer to see which
options are available to you.
Note:
Switches, Thermostats, Locks, Tools, and Scenes options will only appear when Z-wave has been
enabled.
Rules
The following options are programmed in this section:
Programming Field
Action
Rule 1 - 20:
Select Rule 1 -20
Note:
Rules 21-40 are only accessible through TotalConnect Service.
Name:
Name the device
Type:
Select the output type
Action:
Select the action required for the device
Start Zone Type:
OR
Zone Type Fault:
Select Zone Type to start event*
Stop Zone Type:
OR
Zone Type Restore:
Select Zone Type to stop event*
Start System Operation:
OR
System Operation 1
Select System Operation to start event*
Stop System Operation:
OR
System Operation 2
Select System Operation to stop event*
Zone Number Operation:
Select Zone Number to trigger event upon fault, trouble or alarm as selected.
* The displayed field is dependant upon the selection made
Programming Rules
Zones
Arm Away
Ready To Arm
Arm Stay
More
Delay
Phone
10:18 AM June 8, 2010
5100-100-004-V0
72
Message
Automation
1. With the system in the disarmed state,
select the
“
Automation
”
icon from the
Home Screen. The system displays the
Keypad screen.
Summary of Contents for LYNX Touch Security System
Page 89: ... 89 NOTES ...
Page 90: ... 90 NOTES ...
Page 91: ... 91 NOTES ...
Page 92: ... 92 NOTES ...
