Honeywell LYNX Touch Security System, User Manual

Page: 42 / 96

– 42 –
USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS USER FUNCTIONS
Message Recording and Playback
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete All Play
Ready To Arm
6. When you have finished recording, select
“
2
” . The system displays the recorded
messages.
7. To record additional messages (if recording
time is available) repeat steps 1 through 3.
NOTE: If you are trying to record a new message and the message center is already full, “ Add New ” will not
be displayed. If the message center is full all old messages must be deleted before new messages
can be recorded. See the
Deleting Messages section.
Playing Message(s)
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete All Play
Ready To Arm
1. At the Message screen, select the
message you wish to play.
2. Select “ Play ” , the system plays your
message.
3. When you are finished listening to the
message, you may select.
“ Stop ” . If “ Stop ”
is not selected the system continues to
play the remaining messages.
4. When you have finished listening to the
messages, select
“
2
” . The system returns
to the Home Screen.
Deleting Messages
5000-100-046-V0
Message 1 2:48 PM September 1, 2010
Message 2 5:09 PM September 5, 2010
Add New Delete All Play
Ready To Arm
1. At the Message screen, select “ Delete All ” .
The system deletes all messages.
2. When you have finished deleting the
messages, select “
2
” . The system returns
to the Home Screen.