Honeywell LYNX Touch Security System, User Manual

Page: 26 / 96

– 26 –
SECURING THE PREMIS SECURING THE PREMIS SECURING THE PREMIS SECURING THE PREMISES ES ES ES
Disarming the System
Select the “Disarm” icon or the “Off” key to disarm the system and to silence alarm and
trouble sounds. See the
Summary of Audible Notification section for information, which will
help you to distinguish between fire and burglary alarm sounds. During Entry Delay or when
an Alarm Condition exists, the system will be disarmed as soon as the correct user code is
entered on the touch screen. Selecting the Off key is not required. The entry beeps or alarm
sound can be silenced by pressing any key however, it will restart in 10 seconds if the correct
User Code is not entered. The Ready indicator will light (if no alarms have occurred while
armed) and the control will beep once to confirm that the system is disarmed.
**IMPORTANT**
If the LYNX Touch is beeping rapidly upon entering the premises, an alarm has occurred
during your absence and an intruder may still be on the premises. LEAVE IMMEDIATELY
and CONTACT THE POLICE from a nearby safe location.
Disarming the System and Silencing Alarms
Armed Stay
5000-100-056-V1
Phone
More
Automation
Message
Zones
Disarm
72
10:18 AM June 8, 2010
1. Select the “ Disarm ” icon or depress the
“ Off ” key. The system beeps once and
displays a keypad.
Armed Stay
Enter Code:
C a n c e l
2 3 1
5 6 4
0
8 9 7
C l e a r
5000-100-065-V0
2. Enter a valid Code. The system beeps
once and announces
“Disarmed Ready to
Arm” .
Note: If a valid user code is not entered or the
Confirm icon has not been selected
within 30 seconds, the system returns to
the
“ home ” screen and it will not be
disarmed.
If an invalid User Code is entered, system will return to the home screen.