Honeywell LYNX Touch Security System, User Manual

Page: 23 / 96

– 23 –
SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES SECURING THE PREMISES
Arming the System
Arming the System with no delay (Instant)
Use “Instant” with Stay mode when you are staying home and do not expect anyone to use
the entrance door. Use “Instant” with Away mode when the premises will be vacant for
extended periods of time such as vacations, etc. When armed with “Instant”, the system will
sound an alarm if a protected door or window is opened, including the entrance door. You
may leave through the entrance door during the exit delay period without causing an alarm,
but an alarm will sound as soon as someone reenters.
When armed “Instant” with Stay mode, the control beeps three times and displays the
“Armed Stay Instant” message. In addition, the red Armed indicator lights and the system
announces “
Armed Stay Instant –exit now ”.
When armed “Instant” with Away mode, the control beeps two times and displays the
“Armed Away Instant” message. If Exit Warning is enabled the system beeps continuously
for the duration of the exit delay. In addition, the red Armed indicator lights and the system
announces “
Armed Away Instant –exit now ”.
To Arm the System with No Delay (Instant)
Ready To Arm
5000-100-006-V1
Arm Away
Delay
Phone
More
Automation
Message
Zones
Arm Stay
72
10:18 AM June 8, 2010
1. Select the “ Delay ” tab on the home screen.
The icon “ toggles ” and “ Instant ” is displayed.
2. Arm the system in the “ Stay ” or Away ” mode
normally.
Note: The entry delay time is eliminated when
“ Instant ” is selected.
Quick Exit
If active, you can restart the exit delay at any time after arming has been armed in Stay or
Away mode by selecting the “Quick Exit” icon. This avoids having the user disarm then re-
arm the system after allowing someone to enter or exit. The system will re-arm once the exit
delay expires.
Armed Stay
5000-100-060-V1
Phone
More
Automation
Message
Zones
Quick Exit Disarm
72
10:18 AM June 8, 2010
1. Select the “ Quick Exit ” icon to restart the exit
delay.
Note: Quick Exit is active in Away mode when: Auto
Stay mode is enabled and no entry/exit zone
has been faulted during the exit delay period.