48
-
Connect the “+” and “-” of “CH2A IN” to the corresponding ports of “CH2B IN”.
6
．
In dual channel mode, if there are more than 4 zones and the total power rate is more than
500W, 4 external power amplifiers need to be connected as follows:
-
Use a twisted-pair cable to connect the
PA interface “CH1” of the RK-ZONE8 to the PA
interface “IN” of the first power amplifier.
-
Connect the
“100V” and “COM” output of the first power amplifier output port to “CH1A IN”
of the RK-ZONE8;
“COM” output connects to the “CH1A IN -” input.
-
Use a twisted-pair cable to connect the
PA interface “OUT” of the first power amplifier to
the
PA interface “IN” of the second power amplifier.
-
Connect the “100V” and “COM” output of the second power amplifier output port to “CH1B
IN” of the RK-ZONE8.
-
Use a twisted-pair cable to connect the
PA interface “CH2” of the RK-ZONE8 to the PA
interface “IN” of the third power amplifier.
-
Connect the “100V” and “COM” output of the third power amplifier output port to “CH2A IN”
of the RK-ZONE8.
-
Use a twisted-pair cable to connect the
PA interface “OUT” of the third power amplifier to
the
PA interface “IN” of the forth power amplifier.
-
Connect the “100V” and “COM” output of the forth power amplifier output port to “CH2B IN”
of the RK-ZONE8.