IF1C
Fixed RFID Reader User Guide
17
Configure Security
To make sure the reader is secure, change your security settings when you set up
your reader. You can secure the reader by:
•
Changing user credentials
•
Enabling a RADIUS server
•
Enabling or disabling serial configuration
Change User Credentials
If you are not using a password server to authorize user logins to the reader,
change the default user name and password.
1. Log in to the web browser interface and click
Security > Passwords
.
2. Configure the
User Credential
settings.
3. Click
Activate Changes
to save your changes.
User Credential Settings
User Credential settings control the user name and password you use to log in to
the reader.
Setting
Description
Secure Server Enable
Allows connections to the secure LLRP server on port 5085.
Unsecure Server Enable
Allows connections to the unsecure LLRP sever on port 5084.
Download Intermec
Extensions Definition
Downloads an XML file that describes Honeywell-specific extensions for
the LLRP protocol.
Reader Initiated
Connections
For reader-initiated TCP/IP connections to a remote LLRP client.
•
Client address - The IP address of the remote LLRP client.
•
TCP port - Port number for the TCP/IP socket connection.
•
Enable security (TLS) - Select this option to enable Transport Layer
Security for this TCP/IP connection.
Setting
Description
Username
The user name to log in to the reader. The user name can be from 1
to 32 characters long. You must always specify a user name. Default
is
intermec
.
Password
The password to log in to the reader. This password gives you both
read and write access to the reader configuration. The password can
be from 8 to 32 characters long. You must always specify a
password. Default is
intermec
.
