IF1C
Fixed RFID Reader User Guide
7
15. To set the IP address, press
1
, type in the IP address, and press
Enter
.
16. To set the subnet mask, press
2
, type in the subnet mask, and press
Enter
.
17. To set the IP router, press
3
, type in the IP address, and press
Enter
.
18. (Optional) To change the Ethernet link speed, press
L
, and choose the link
speed.
19. Press
Q
to close the Initial Configuration screen.
20. Remove the USB cable from the reader. The reader is ready to be configured
and connected to your network.
Log In to the Web Browser Interface
After the reader is assigned an IP address, you can configure the reader through
the web browser interface. Before you log in, make sure an IP address has been
assigned to the reader, and the reader is connected to your network.
1. Start a web browser.
2. In the browser address field, enter the IP address, and press
Enter
.
3. (Optional) For a secure session, click
A secure session is available
.
