62
System Administration and Troubleshooting
Checking the Hardware
To check the hardware:
1.
Log onto the controller.
2.
From the
Settings menu, press
Check Hardware.
The Check Controls submenu
displays.
•
Key: When you press a key,
the key value and its status is
displayed on LCD.
•
Joystick: When you move the
joystick, values which present
the PTZ positions of the
joystick are displayed on the LCD.
•
Slider: When you rotate the touch pad, specific values are displayed on the LCD.
•
LCD: Press LCD and the LCD will appear white. It will appear black, red, green
and blue when you touch the screen each time. You can use this method to
check whether there is a dead pixel on the screen.
•
TS: Press TS and a grid-map displays. You can touch each grid to check whether
the LCD is working well.
3.
Press Quit to exit.
User Menus
To change the starting menu of the
controller:
1.
Log onto the controller.
2.
From the Settings menu, press User
menus.
The User menu submenu displays.
3.
Press the button to be modified except
Home on the LCD.
4.
The two buttons of the top line
indicates the two options for the button size in the pop up menu. Press one to set the
button size.
5.
To set the button top text, press Top Text and Enter text. The text you typed displays
on the top of the button.
6.
To set the button bottom text, press Bottom Text and Enter text. The text displays on
the bottom of the button.
7.
Press MaxKey and set the button function.
8.
Press Menu to modify the system menus.
Summary of Contents for #HZ-7000 - Sure-set Digital Heater Fan
