Operation
18
Alarm Info: Warns light flashing when camera device inform alarm. Support kinds of alarms record, and
setup or remove the alarm setting,clear the alarm information.
Zoom-in: Use the mouse to do local zoom for the video display area by scrolling the mouse wheel.
PTZ control: Up/ down/ left/ right/ auto/ adjust the PTZ rotate speed, etc. As figure 4-9.
Lens control: Do scaling, focus, iris operation, as figure 4-9.
Brightness: Adjust the image brightness. As figure 4-10.
Contrast: Adjust the image contrast. As figure 4-10.
Cyclotron arrow: Restore the default parameters. As figure 4-10.
PTZ setting: preset setting, cruise, track setting, linear scan, idle ope , IR light, wiper, spray setting.As figure
4-11.
Preset setting: Adjust the camera to the appointed angle and location through directional buttons,
and then select a preset number on the preset drop down list, click
to set it.
Call preset: Select a preset number which needed to call on the preset drop down list, then click
to call
it.
Cruise: 255 presets addable, stay time 1-255s adjustable, cruise speed 1-7 levels selectable. All
cruise tracking can be call and delete independently.
Clear cruise: Click
to clear all cruise scan setting
Call cruise: Click
to call setted cruise scan
Tracking path setting: Select a number at the tracking drop down list, click
, and do a serious PTZ
operation, then click
to save and exit the tracking path setting.
Call tracking path: Select a number at the tracking drop down list, click
to call tracking path
Linear: Select a number at the linear drop down list, click
to set the linear scan initial position, and
do a serious PTZ operation, then click
to save and exit the linear scan setting.
Linear scan only supported horizonal scan, and the vertical angle depend on the final position, linear
path is two point minimum path
Call linear: Select a number at the linear drop down list, click
to call linear scan
Idle ope : Idle ope include preset setting, cruise scan, tracking, swing scan. Click
to set idle ope,
and the idle time is 1-15 min selectable, click
to save the idle ope setting, click
to
verify whether the idle ope setting completed. When set idle ope successfully, speed dome camera will
do idle ope operation after the setted idle time
IR light: Auto/ Manual selectable, when select Auto, it will turn on the IR led according to the zoom
module multiples, near open for 1X, middle-open for 2-4X, far open for 5X or 5X later. When select
Manual, there All close/ near open/ middle open/ near middle open/ far open/ far near open/ middle far
open/ all open totally 8 kind of choices
Wiper: Open or close wiper function.
Summary of Contents for HEIPTZ-2201W-IR
Page 3: ...Honeywell ii LAN 46 Internet 48 Frequently asked questions 52 ...
Page 5: ......
Page 7: ......
