Honeywell HEIPTZ-2201W-IR, User Manual

Page: 33 / 62

Operation
26

Day-Night Mode:Auto/Color/Black White selectable,default is Auto.According to the IP camera type and
using actual scene, user can select day & night switch mode optional.
After all parameters setting completed, click “Save” and the it comes into effect immediately.
Motion Detection
Network High Speed Dome
“Motion Detection” setting interface as figure 4-17.
Figure 4-17

Enable: Select whether open the motion detection function.

Alarm Schedule: Set the alarm schedule from Monday to Sunday.

Drawing: Click Drawing, then set the detective area.

Clear: Click Clear to clear the current detective areas.

Sensitivity: The higher of the sensitivity, the obvious of the motion detective.

Email: Send Email to appointed mailbox when alarm triggered.

Snap: Snapshot and install the picture in the HDD when alarm triggered.

Alarm Output: There is a warner connect the alarm output port, alarm triggered the embedded relay switch
to make alarm output.

Enable PTZ: Alarm input to link the PTZ motion.

Preset: Alarm input to link the preset.

Snap Interval: Set the snapshot interval time

Snap Count: Set the snapshot count in every second
After all parameters setting completed, click “Save” and the it comes into effect immediately.