Honeywell HEIPTZ-2201W-IR User Manual Download Page 57

Page: 57 / 62

Appendix

DDNS setting procedure

：

1. Login DDNS server ( Such as http://www.no-ip.com), register accounts and password.

2. Click DDNS ( It is selectable when server provider is blank)

3. Select DDNS server provider, such as no-ip

4. Input the DDNS login username

5. Input the DDNS registered password

6. Input the domain name applied on the DDNS server, such as video.no-ip.net

7. Input the DDNS address, such as dynupdate.no-ip.com

8. Input the DDNS port, default is 80.( Suggested users keep it)

After all parameters setting co

mpleted, click “Save”and devices comes into effect.

Port mapping setting procedure

TP-LINK TL-WR340G illustration:

1. Ask network administrator for the IP address of the router (i.e. LAN gateway address), login user name and

password, then log in the router. The main interface is as follow:

Summary of Contents for HEIPTZ-2201W-IR































































Search results

Summary of Contents for HEIPTZ-2201W-IR

Reviews:

Related manuals for HEIPTZ-2201W-IR

Brands by name

Popular brands

Honeywell HEIPTZ-2201W-IR, User Manual

Search results

Summary of Contents for HEIPTZ-2201W-IR

Reviews:

Related manuals for HEIPTZ-2201W-IR

Brands by name

Popular brands